-43%
SKF Internal Bearing Puller Kit TMIP 30-60
$1,619.00 Original price was: $1,619.00.$1,109.00Current price is: $1,109.00.
SKF TMMA 100H/SET EasyPull - Hydraulic Puller Set for Versatile Use
$2,914.84 Original price was: $2,914.84.$2,468.00Current price is: $2,468.00.
SKF TKBA 40 Precision Belt Alignment Tool for Effective Maintenance
Add Your Heading Text Here
$4,244.00 Original price was: $4,244.00.$2,399.00Current price is: $2,399.00.
Categories: Alignment tools, Diagnostic tools, SKF, TOP SELLERS
SKF Belt Alignment Tool TKBA 40
The SKF Belt Alignment Tool TKBA 40 aligns V-belt pulleys in the grooves. V–guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laser–emitting unit and a receiver unit, the belt alignment tool is easy to use and allows fast and accurate belt alignments. The three-dimensional target area on the receiver unit helps the easy detection of misalignment as well as its nature, whether it is horizontal, vertical, parallel or a combination of all three.
- Powerful magnets allow fast and easy attachment.
- Three-dimensional target area simplifies detection and correction of misalignments.
- Facilitates simultaneous adjustment of tension and alignment.
- V-guides included for a wide range of V-belt pulleys.
- Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
- Special side adaptor for alignments of multi-ribbed and timing belt pulleys as well as sprockets is available as accessory.
SKF Belt Alignment Tool TKBA 40
The SKF Belt Alignment Tool TKBA 40 aligns V-belt pulleys in the grooves. V–guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laser–emitting unit and a receiver unit, the belt alignment tool is easy to use and allows fast and accurate belt alignments. The three-dimensional target area on the receiver unit helps the easy detection of misalignment as well as its nature, whether it is horizontal, vertical, parallel or a combination of all three.
- Powerful magnets allow fast and easy attachment.
- Three-dimensional target area simplifies detection and correction of misalignments.
- Facilitates simultaneous adjustment of tension and alignment.
- V-guides included for a wide range of V-belt pulleys.
- Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
- Special side adaptor for alignments of multi-ribbed and timing belt pulleys as well as sprockets is available as accessory.
SPECIFICATIONÂ
Width (mm): 460
Length (mm): 200
Height (mm): 260
Total weight (incl. yokes): 20.9
Heater Type: Small
Temperature Control: 20°C to 250°C (68°F to 482°F)
Power Supply: 200-240V/50-60Hz
Maximum Power Consumption: 2.0 kVA
Demagnetization: <2 A/cm
Voltage: 200-240 V/50-60Hz
Voltage Classification: LV
Coil Diameter: 95mm
Standard yokes (included) for minimal bore diameter: 1 x 65mm, 1 x 40mm, 1 x 20mm
Optional yokes for minimal bore diameter: 30;60 mm
Max. Bearing Weight (Kg): 40Kg
Bore Diameter Range (mm): 20-300mm
Operating Area (w) x (h): 100 x 135mm
EAN code: 07316572338445
Weight | 1 kg |
---|---|
Dimensions | 28 × 21 × 11 cm |
Be the first to review “SKF TKBA 40 Precision Belt Alignment Tool for Effective Maintenance” Cancel reply
Reviews
There are no reviews yet.