SKF Hydraulic Jaw Puller Kit TMHP 10E

SKF Hydraulic Jaw Puller Kit TMHP 10E

The TMHP 10E is a complete puller kit for bearing dismounting. The kit includes three different arm sets that can be used in a 2-arm or 3-arm configuration. The puller uses a hydraulic spindle for easy dismounting with dismounting forces up to 100 kN (11.2 US ton). With a stroke of 80 mm (3.1 in.), the spindle facilitates dismounting in one operation. Safety is supported through a self-locking arm that reduce puller slippage under load, a spring-loaded Centre point to enable easy spindle centering and a safety valve to prevent puller overload.

• Versatile kit with three different arm lengths usable in 2-arm or 3-arm configuration
• Effortless dismounting with hydraulic spindle
• Self-locking arms minimize risks of slippage under load.
• Spring-loaded Centre point allows easy puller centering.
• Supplied with three hydraulic spindle extension pieces to allow quick adaptation to required pulling length.
• Hydraulic spindle is equipped with safety valve to prevent puller overload.

Specification

Manufacturer Product Code:  TMHP 10E

Basic Product Description:   Hydraulic Jaw Puller Kit TMHP 10E

UOM:  Kit

Weight (Kg): 14.5

Kit Contents: 

• 1 x arm-assembly stand
• 3 x arms, 115 mm (4.5 in.)
• 3 x arms, 160 mm (6.3 in.)
• 3 x arms, 200 mm (7.8 in.)
• 1 x hydraulic spindle TMHS 100
• 3 x extension pieces for hydraulic spindle; 50, 100, 150 mm (2, 4, 6 in.)
• 1 x nosepiece with Centre point for hydraulic spindle
• Effective arm length/Reach:  115mm

Maximum withdrawal force (kN):  100 kN

Max Working Pressure hydraulic cylinder:  80MPa

Puller Type or Accessories:  Hydraulic Pullers

Series:  TMHP

EAN code:  7316572298428